A 450 tonne All Terrain crane went over on a wind farm in Denmark last week dropping the rotor blades of a turbine it was helping to repair.
Identify the rigging that does not have sufficient rated capacity for the load. If under-rigged, suggest the proper size.
Use the panels from the Journeyman Rigger’s Reference Card (pictured below) to determine the capacities for the …
About a year ago we launched Ace of Sales 1.0 – instant success. Salespeople loved our customized emails that set them apart from the competition and the ability to send low cost custom greeting cards and postcards. They loved the ability to do all social media from the Ace of Sales home page. They loved the ability to import their outlook contacts.
When using temporary trolley beams to hoist and transfer a load, special consideration must be given to the loads imposed at the beam’s support points.
In the following example, the tare weight of the …
A LARGE Dutch ship which has its own massive onboard tower cranes sailed up Walney Channel for the first of eight visits to the port to start a new phase of a windfarm’s development. Fair Partner, owned by Jumbo Shipping of Holland, effectively kicked off phase two of the construction of the £1bn Walney Offshore Windfarm, nine miles off Barrow.
Estimating a load’s approximate weight is always an important part of any rigger’s checklist and must be done before choosing the rigging system. Have some fun and estimate the weight of the half …
Estimating a load’s approximate weight is always an important part of any rigger’s checklist and must be done before choosing the rigging system.
Have some fun and estimate the weight of the storage tank …
Linden Comansa has introduced two new models of luffing-jib cranes. The company says the new models will be available by the end of April. These new cranes, LCL 310 and LCL 280, altogether with the LCL 190 presented last year in Bauma, form the new family of luffing-jib cranes from Linden Comansa, which will be completed this summer with the launch of a fourth model, the LCL 165.
Perth- Australia, a court has fined two directors of D&G Cranes $45,000 each and the company $90,000 for a fatal accident in 2007. D&G Hoists & Cranes, operations director David Keating and Luigi Vincenzo Decesare, managing director, were found guilty in December of failing to provide and maintain a safe workplace, which caused the death of Luke Murrie, 22, after he was struck in the head by a 375kg tower crane section.
With four quick lifts, raising the load only a few inches, a rigger can confirm:
a) The load’s estimated weight
b) The load’s approximate center-of-gravity (CG)
c) The approximate load at each pick point
Find the approximate weight and …